Basically there's nothing you can do about this. One thing you can do is to purchase a drone that does not have no fly zones. There are many inexpensive GPS drones getting released right now and I bet most of them do not have any flight restrictions. You still need to follow the local rules however. 2016-6-3. With the DJI Mini 3 Pro Intelligent Flight Battery Plus, the aircraft will weigh more than 249 g (about 290 g). Please check and strictly abide by local laws and regulations before flying. 2. The max flight speed is subject to local restrictions that may change. Please abide by local laws and regulations when flying. 3.
The FAA has provided No Drone Zone sign that can be used by these governments to identify areas where there are local flight restrictions. It is important to note, these No Drone Zones only restrict taking off or landing and do not restrict flight in the airspace above the identified area. Temporary Flight Restrictions (TFRs) define a certain
A scenario where the unlock license may fail to appear in DJI equipment. Once upon a time, I did successfully request unlock from DJI FlySafe unlock but the license never appeared. Eventually I figured out why. Technically, when using the Fly app, we are logged-in to DJI but tend not to think about it.
The default max flight height for your Mavic Mini is 120 m, which can be increased to 500 m by changing the settings in the DJI Fly app. The max takeoff altitude is 3000 m. But please be aware that the max flight height can change depending on the different rules and regulations observed across different countries and regions.
My Mavic Air operates normally in the United States. When I started a flight in China, my flight distance is limited to 50 meters and the height is limited to 30 meters. I have tried to fly many times in different locations and the problem persists. Beginner mode is disabled, and I am not flying in a NFZ. Max flight altitude is set to 120 meters, and I did not set a maximum flight distance
1#. Several times the message ( Mavic Air2): "Flight altitude restricted. Log in or go to real-name authentication (Code: 120948)". And I am certainly not in a restricted zone. Drone will not go higher than 30m and about 40m far. The problem is logging in. Try to log in again on the app (DJI Fly app), but to no avail. The DJI Mavic Air is the newest drone in the “consumer” line of products. At an MSRP of $799 for the drone itself, it is twice more expensive than the most basic “Spark”, but $300 cheaper than its larger brother, the Mavic Pro. Thanks to its foldable design, it is the smallest of the three. Select the blue pin that covers the zone you want to unlock (remember, blue = Self Unlock zone). Enter your flight controller’s serial number. Choose the planned date of your flight and hit Submit (An unlock will last for 72 hours after the initial time and date). Agree to the terms and conditions and click ‘Agree.’. Jun 13, 2021. #1. I was trying to fly my Mavic Mini about 3 Miles from the Birmingham, Alabama Airport Saturday and I got a restriction message from DJI that I was in a restricted Zone and my Mini was landing in 90 Seconds! And it landed in 90 Seconds! I always thought that the Mini was exempt but I was apparently proven wrong especially when I Hope this helps. There are the 3 no fly zones (Hyde Park, City of London and Docklands) and of course zones around the airport and heliports. But other than that looks like London flying is allowed (subject to the new drone code) dominoslater, natashane and heyengel. P. If I had known about all of these issues with software and firmware updates and this would be a part of the program or "experience", I would have delayed purchasing this machine. Furthermore, with the software restrictions from DJI imposing flight limitations on their machines, only recently, I
Here is a guide on how to do it in the DJI Go app: Connect the aircraft and the device, then launch the app. Go to camera view and select General Settings. Tap on Unlocking License. Tap “App” and “Sync” to download your license. Tap on ‘Import to aircraft’ to update the license on your drone.
Jun 15, 2020. #7. When you are ready to fly, click on the three dots in the upper right corner and, under the safety heading, scroll down to Unlock GEO Zone and click on the little sideways v on the right and it will bring up your Flight controller info on the left. On the right, you will see "Import to aircraft". pJo7J.
